TV installation Brisbane- mistakes you must avoid

When installing a TV, there are certain errors you must avoid. It’s not only important to place emphasis on the aesthetics like how the TV would look, it must be installed properly. There should be no issue with wires or cables. You must install them in a way that they do not get tangled up.

 

Always decide on a location first

People make a big mistake when they are undecided about the location of installing the television. If they’re not aware of where the television will go, it will be a challenge to install it properly. The chosen spot should be an area where one can avoid tripping over the wires and it doesn’t turn out to be an eye sore.

Consider the amount of space the television should have. Once it has been installed, do not choose a spot that block doors or windows or create awkward angles between seats and viewing angles.

 

Measure the wall studs

Use a stud finder or just touch your hand against the wall. If you want to be accurate, use two hands and ensure that one hand is in contact with each surface of the wall. This ensures you are measuring the position of the start and it will be as accurate as possible.

 

Use correct mounting hardware

Before you mount the TV, purchase the right hardware. Not all the hardware is same and some might work better than the other.

Purchase bolts long enough to go through the wall starts but they must not be too long that they protrude into the room and create a mess.

If you are mounting a small TV on a dry wall,  purchase screws which are useful for thicker walls. A six inch rack screw with wooden anchors is ideal for a concrete or brick wall.

You will need a drill along with various bits depending upon the type of wall material. Invest in a stud finder which is a simple metal detector. Everything will line up correctly during installation.

 

Picking an ideal mounting position

People make the mistake of mounting the TV too high. It is difficult to see the screen even when the zoom feature has been turned on. Ideally you should be able to see the bottom 1/3rd of your screen from the seat for better viewing and avoiding neck strain.

 

Install the TV in a properly lightened room

Ensure there is enough light in the room. Some rooms are naturally brighter than others and it is difficult to figure out how bright the TV will look when viewed in different rooms. Avoid placing the TV too close to the windows or other light sources.

The reflections appear on the screen and interfere with your viewing. Before you hang the TV, determine the walls in the living room space that receive the least amount of light.

Use dimmable light which are installed under the overhang above the headboard.

 

Install an outlet behind the TV

Install a TV near an outlet so that the cords don’t clutter up the space. If the outlet is not present, you need to create an outlet first. The outlet should  have surge protection capabilities built in the circuit. Speak with an electrician about options.

 

Call a professional TV installer in Brisbane

You might want to do it all by yourself. However, it takes more than one person to mount the TV. You first need to lift it and  hold it in place while attaching it to the mount. It is something which can’t be done by one person. If you plan to do an installation by yourself, l it should be done as professionally as possible.

It’s best to hire a professional so they’ll do a good job. Explore Brisbane’s TV installation options. Speak with one of our experts today for getting help for TV installations in Brisbane.